Todas as atualizações da X32 Behringer e M32 Midas

Tempo de leitura: 23 minutos

Você não vai mais precisar ir em outro lugar, aqui chegou o fim da sua procura, pois aqui, você encontra todas as atualizações da M32 Behringer e M32 Midas.

Atualizado em 11/11/2019

Os downloads estão organizados por Sistema Operacional, Driver da Placa de Som (para o Windows que não detecta automaticamente) e Editores de Acesso Remoto (Computador e Dispositivo Móvel).

Últimas atualizações da X32 Behringer e M32 Midas para o Sistema Operacional para instalar no console

Se você tiver dificuldades para instalar as atualizações de sistema operacional, experimente seguir as rotinas na publicação: como atualizar com sucesso.


x32 Firmware (v3.12):


m32 Firmware (v3.11):

Últimas atualizações da X32 Behringer e M32 Midas para o Driver da Placa de Áudio para Windows



X-LIVE Driver Setup 4.59

X-USB ASIO Driver 4.59

X-UF Firewire Driver 6.13

X-UF USB Driver 6.13


DN32 USB ASIO Driver 4.59

Últimas atualizações da X32 Behringer e M32 Midas para o Editor Remoto para Computador



x32-Edit para Windows (v3.1)

x32-Edit para Windows (v2.5)

x32-Edit para Mac (v3.1)

x32-Edit para Mac (v2.5)

x32-Edit para Linux (v3.1)

x32-Edit para Linux (v2.5)

x32-Edit para Linux 64Bits (v3.1)

x32-Edit para Linux 64Bits (v2.5)

x32-Edit para Raspberry Pi (v3.1)

x32-Edit para Raspberry Pi (v2.5)


m32-Edit para Windows (v3.1)

m32-Edit para Windows (v2.5)

m32-Edit para Mac (v3.1)

m32-Edit para Mac (v2.5)

m32-Edit para Linux (v3.1)

m32-Edit para Linux (v2.5)

m32-Edit para Linux 64Bits (v3.1)

m32-Edit para Linux 64Bits (v2.5)

m32-Edit para Raspberry Pi (v3.1)

m32-Edit para Raspberry Pi (v2.5)

Últimas atualizações da X32 Behringer e M32 Midas para o Editor Remoto para Dispositivo Móvel



x32 Q for iPhone, iPad, and iPod Touch

x32 Mix for iPad

x32-Q Android

x32 Mix for Android (Mixing Station)


m32 Q for iPhone, iPad, and iPod Touch

m32 Mix for iPad

m32-Q Android

m32 Mix for Android (Mixing Station)

As atualizações da X32 Behringer e M32 Midas em uma História de Sucesso

Atualizações da x32 e m32 da versão 3.12 (2019-04-08):


– M32/M32R fader/scribble update after scene recall fixed

Atualizações da x32 e m32 da versão 3.11 (2019-03-22):


– DN32-WSG and DN32-LIVE temporary support over OSC fixed

Atualizações da x32 e m32 da versão 3.10 (2019-02-08):


– xtouch: pressing REC starts 2-channel usb recorder correctly
– xtouch: send to linked bus pan can now be reset by pressing pan encoder
– headamp remote startup bugfix
– X series fader firmware update enabled again

New features:

– channel color/name broadcast via aes50
– support for DN32-WSG

Atualizações da x32 e m32 da versão 3.09 (2018-06-28):


– Fix for auto mute when using very specific PEQ (parametric equalizer) settings

Atualizações da x32 e m32 da versão 3.07 (2017-11-09):


– Midas IO boxes (DL15x, DL25x) now correctly detected when multiple remote clients are connected
– fader accuracy in send on fader mode improved
– performance of automix function improved (with very low input signals)
– ADAT and MADI card sync light flicker fixed
– support for X-WSG and X-LIVE implemented
– fader board firmware update disabled (replaced by standalone updater)

Atualizações da x32 e m32 da versão 3.07 (2016-09-30):


– x-touch channel color and name update problem corrected
– x-touch assigning mute groups fixed
– labels on snippet page corrected (console scope)
– fader tolerance issue with some M series consoles fixed

Atualizações da x32 e m32 da versão 3.04 (2016-08-24)


– PREV cue button function fixed
– gate and dyn module gain graphs always show active gain curve (in grey when module is not active)
– automix gain reduction meter scaling corrected

Atualizações da x32 e m32 da versão 3.00 (2016-08-04)


– indication of available outputs on routing page corrected for models with 8 outs
– fixed issue with send mutes when dca bank was selected in sends on fader mode
– compatibility with new editor version
– rearranged screen encoders on sends page for consistency
– show/snippet name redraw issue fixed
– monitor metering point changed (to indicate output clipping)
– channel name/icon no longer copied (odd->even) when link is activated
– -action/clearsolo now also deactivates key solo

New features:

– 8 channel (1..8) automixing with two groups
– phase invert on outputs, aux, aes/ebu, P16
– xover filter types on main and mono/center
– x-touch remote control (MIDI/Ethernet)

Atualizações da x32 e m32 da versão 2.16 (2016-02-02)


– fixed DIN midi remote control problem introduced in 2.15

Atualizações da x32 e m32 da versão 2.15 (2015-11-06)


– channel group assignments synced when fader link option is reselected
– eq gain center led only lights up when gain is exactly 0 dB
– hard mute state shown on meter pages (dark red fader knob)
– eq band reset bug fixed
– screen draw routines significantly accelerated
ducker attack and release times fixed (were swapped since 2.10)

Atualizações da x32 e m32 da versão 2.14 (2015-07-16)


– X-USB and DN32-USB were reporting wrong sample rate after changing sample rate without reboot

Atualizações da x32 e m32 da versão 2.13 (2015-07-06)


– fixed an issue where iQ speaker settings were not recalled correctly when linked
– iQ setup now also accessible via layer buttons
– fixed an issue where inserts were not activated when usb was very busy during startup
– correct preamp indication on DL152..DL155, output SRC disabled on DL155
– fixed an issue where midi messages were duplicated when assigned to more than one assignable button/encoder simultaneously

Atualizações da x32 e m32 da versão 2.12 (2015-06-01)


– HUI level meters and LCD fixed
– DHCP menu on X32CORE fixed
– fixed rare issue where aes50 slave mode won’t sync
– iQ speaker settings moved to /outputs/p16 path

New features:

– iQ speaker link function

Atualizações da x32 e m32 da versão 2.11 (2015-04-09)


– load show file in X32CORE fixed (snippet offset)
– fader motor issues on M32/M32R (minimum position) fixed
– exclude hidden and system files from usb file list
– correct indication of 0 dB fader position
– scene GO and UNDO leds fixed
– DHCP can be selected on X32CORE
– bus AFL solo correctly uses pan when bus is routed to LR

New features:

– support for M32C, S32, DL32, DL231

Atualizações da x32 e m32 da versão 2.10 (2014-11-20)


– screen flicker when switching between pages with overlay graphics removed
– improved clock stability in Dante slave mode

New features:

– rta detector selection (rms/peak), peak hold, and adjustable decay time
– gate section: expander with adjustable range
– compressor section: compressor/expander with auto mode

Atualizações da x32 e m32 da versão 2.09 (2014-10-23)


– fixed issue where usb drives were not recognized when connected during power-on
– setup/global and setup/config screens rearranged
– sample rate can now be changed without reboot
– issue with mute menu on scenes/home screen fixed
– some redraw issues related to mute menu fixed

New features:

– safe shutdown (incl. usb recorder shutdown), console reboot, firmware update, factory reset added to setup
– selectable 12h (am/pm) and 24h clock mode
– new options: hard mute groups, dcas as mute groups, invert mute leds (for broadcast use)

Atualizações da x32 e m32 da versão 2.08 (2014-09-12)


– Xedit bug fixed when changing fx type
– xlr out routing added to routing snippet
– p16 and aes/ebu routing added to out patch snippet
– jitter when syncing to adat/word clock/madi reduced
– sporadic noise when switching between special combinations of fx types removed
– sporadic click at end of usb playback removed
– sporadic reboot when using too complex osc subscriptions (old X32-mix on iPad 1) fixed
– sporadic loss of meter information (osc clients) fixed; osc server version 2.05

New features:

– support for DN32-MADI, DN32-DANTE, DN32-ADAT
– support for DL15X and DL25X stage box series
– iQ control via stage box P16 port (requires fw >= 2.0 on S16/DL16)

Atualizações da x32 e m32 da versão 2.07 (2014-06-26)

New features:

– support for DL16
– M32 support

Atualizações da x32 e m32 da versão 2.06 (2014-06-16)


– cue delete fixed
– dante card playback gain fixed
– ‘use rta source’ for geq fixed

Atualizações da x32 e m32 da versão 2.05 (2014-05-27)


– fixed incorrect power-on channel mute state when assigned to mute groups
– fixed issues with right fader bank when in geq on faders or remote mode
– fixed dyn key meter on M/C channel
– osc server updates to support fast sync mode w/ X32Edit
– tap function improved

Atualizações da x32 e m32 da versão 2.04 (2014-04-23)


– minor graphics and parameter name fixes

Atualizações da x32 e m32 da versão 2.03 (2014-04-11)


– acceleration for user assignable rotaries on assign home page
– screen flicker and delay fixed when loading cues/scenes/snippets
– scene management improvements and fixes
– remote encoders on assign home page now correctly send out midi messages
– osc server enhancements for X32edit 2.x

New features:

– mix control on compressors (parallel compression option)

Atualizações da x32 e m32 da versão 2.02 (2014-03-11)


– aux/fxrtn sends to subgroup fixed
– output routing tap selector fixed
– dry switch on dimensional chorus
– to end all these discussions: hold sends on fader button (> 1s) to stop blinking
– stereo delay mono feed diagram corrected
– preamp remote control issue with linked channels fixed
– X32CORE scene recall and show import fixed
– snippets fixed (problem with 1st data line)
– usb recorder assign key ‘PREV’ fixed
– GO button led fixed

New features:

– assignable controls can be accessed on X32RACK by pressing MUTEGRP & UTILITY simultaneously
– midi control of mute groups (CC #80..85 on channel 2 [B1 50 xx .. B1 55 xx])
– midi snippet recall ([C1 xx])
– midi cue recall ([C2 xx] 0..127, [C3 xx] 128..255, [C4 xx] 256..383, [C5 xx] 384..499)
– cue and snippet recall on assignable buttons (including name display on small lcds and assign home screen)
– M/C can be used as effect send bus (FX 1..4)
– V1.x scene/show/library conversion

Atualizações da x32 e m32 da versão 2.01 (2014-01-23)

– dual enhancer fixed
– file version check (show/libs)

Atualizações da x32 e m32 da versão 2.00 (2014-01-22)


– new eq encoder assignment (main lcd)
– channel icon/name visible on fx inserts (dual mono only)
– console init bus send 1-8 default now post eq instead of pre fader
– faders disabled when locked and remote controlled
– comp threshold range reduced to -60..0 dBFS
– sends on fader button flashing
– relaxed sends on fader function (automatically deactivated only by pressing DCA button)
– improved indication of sends on fader signal flow on small displays
– stagebox lock moved to setup/preamp page
– increased parameter resolution on rackamp
– increased sensitivity on deesser
– gain reduction meter on precision limiter

New features:

– eq on fx return channels
– expander mode (1:2, 1:3, 1:4) in gate section
– 100 band rta/spectrograph (on meter page and as overlay on eq and geq screens)
– user assign rotaries available on assign home page (for producer/compact)
– console lock on HOME button (2.5s), doubles as safe shutdown
– individual eq band reset (w/ undo)
– dca level meters (max post fader level of assigned channels)
– additional pre gate tap for bus sends
– additional post gate tap for outputs
– output routing w/ optional muting (e.g. mute P16 feeds w/ channel mutes)
– smart handling of send levels when changing bus mode
– gate / comp key signal level indication
– additional lcd color modes (inverted display)
– xlr outputs added to routing matrix (e.g. foh passthru)
– sends on fader for mono/center bus and matrices (bidirectional)
– fader extend mode (input channels on bus faders); press two bank select buttons simultaneously (Producer and Compact only)
– gain split mode for foh/mon; ha gains can only be set on setup/preamp page, channels have trim only
– gain remote option; allows console gains to be remote controlled by another console (e.g. use X32RACK as stagebox)
– when pushing the effects button or selecting a channel while on any fx page, the corresponding fx and layer is
automatically selected when used as insert on selected channel or as send effect on selected bus
– jump to page user function optionally includes fx layer
– midi control of channel level, mute, and pan
– freeze function on vintage room
– lots of new effects
– new scene management (cues/scenes/snippets)
– faster boot time and smaller update file size

Atualizações da x32 e m32 da versão 1.15 (2013-07-26)


– support for latest X32-Edit
– ‘select follows solo’ function only selects a channel when solo is activated, not when deactivated
– icon and name now copied when activating a channel link

New features:

– additional aux routing sources (2, 4, or 6 channels)
– direct routing of aux inputs to aes ports and/or card
– push & hold the encoder during power-on to initialize the X32CORE
– X32CORE enters ‘safe to power off’ mode (i.e. all settings saved) when in setup menu (push & hold the USB button)

Atualizações da x32 e m32 da versão 1.14 (2013-06-12)


– better indication of selected channel on main lcd when no channel icon is set (for Producer and Rack)
– eq section locut/hicut leds also used for xover filter types
– headamp settings are copied when channels get linked (and link ha preference switch is on)
– stage box gains can be (pre-) set when no stage box is connected (setup/preamps page)
– digital trim now +/- 18 dB

New features:

– channel auto select option
– fader of selected channel can be assigned to user encoders
– tape (usb recorder) control can be assigned to user buttons
– X-USB card support

Atualizações da x32 e m32 da versão 1.13 (2013-02-06)


– wrong indication of channel send fader position on home screen after changing send tap/bus type fixed
– mackie control implementation fixed
– OSC server enhancements

New features:

– dca mutes and mutegroups available on assignable buttons
– fader (channel and dca) available on assignable encoders

Atualizações da x32 e m32 da versão 1.12 (2013-01-17)


– encoder acceleration improved
– channel afl solo now always post insert
– sends on fader related freeze fixed

New features:

– full support for all new models

Atualizações da x32 e m32 da versão 1.11 (2012-12-11)


– link/unlink solo issue fixed

Atualizações da x32 e m32 da versão 1.10 (2012-11-29)


– talkback gain reduced (default was way too high)
– surface engine redesigned to support all new models
– handling of fader move events while switching fader assignment fixed
– bus afl solo now always post insert
– sporadic noise when changing insert position removed
– user buttons can now be (re-)assigned to JUMP function regardless of previous function (by holding one
of the SET buttons)
– user defined buttons now correctly return to previous banks when used for sends on faders

New features:

– direct control of all preamps (on setup page) to allow inline recording mode and live card inserts
(route local or aes inputs to card, route card returns to console input channels – set preamp
gain (2.5 dB steps) on this new setup page, adjust digital trim on console ‘tape return’ channels)
– Dual and Stereo DeEsser Effect with M/S processing option
– phase invert on matrix buses
– xover filter types (butterworth, bessel, linkwitz-riley up to 24dB/oct) on matrix bus eq bands 1/6
(selectable on EQ page). These use bands 1+2 and/or bands 5+6 when activated.
– matrix send taps selectable (pre/pos EQ, pre/post fader)
– independent channel mute and fader safes
– channel/bus mute indication on meter screens
– scribble strip editing removed from CONFIG/UTILTY page – now accessible on SETUP/SCRIBBLE STRIP page
(or use select button + UTILITY shortcut)
– due to additional scenes parameters (matrix bus options) all scenes that use matrix buses should be checked
(existing scenes do not contain the additional parameters). It is best to initialize the console, then load and
immediately safe back each scene.

Atualizações da x32 e m32 da versão 1.09 (2012-09-27)


– when ‘safe main level’ and ‘m/c depends on main l/r’ are activated,
m/c level is no longer set to -oo on powerup
– user defined buttons now correctly return to previous page when used as channel select
– ‘pre’ leds now correctly work when auxes or fx returns are selected
– player now plays non-canonical wave files with no artifacts at the end
– recoder automatically restarts with new file when size limit (2GB) is exceeded
– dca solo now also includes channels that are not routed to main L/R (e.g. to group buses)
– erratic behaviour of ch 1 input delay and matrix 6 insert fixed

New features:

– current settings (i.e. single scene) can now directly be saved (to the usb drive)
– fx utilities include algorithm (fx type) selection
– osc server updated to 0.7 (to support XiControl update)
– signal flow diagrams dynamically updated when changing dyn/insert position

Atualizações da x32 e m32 da versão 1.08 (2012-08-31)


– ambience fx redraw issue fixed
– player/recorder no longer drops last block
– crash when using channel library after assigning ‘- Param 64 -‘ to any assignable controller fixed
– pre/post indication on channel home screen updated

New features:

– sends on fader on a specific channel or bus can be assigned to user assignable buttons
– scenes can be assigned to user assignable buttons
– holding down a select button and pressing UTILITY now directly accesses the naming screen
– solo option ‘Dim PFL’ allows to apply DIM to PFL sources (to align levels when using as monitor console)

Atualizações da x32 e m32 da versão 1.07 (2012-08-22)


– sporadic freeze when using presets/scenes with long names (> 15 characters) fixed

Atualizações da x32 e m32 da versão 1.06 (2012-08-21)


– freeze when using library fx load with confirmation disabled fixed
– thump noise when using master GEQ and loading tremolo/pan into any other fx slot removed
– main bus afl solo fixed
– non-ascii characters in filenames (on usb thumb drive) are now ignored so that these files
can be selected for play (though it is recommended to use ascii characters only)
– after song has been played (in single mode), player returns to stop mode
– high eq in tube stage fx fixed
dyn key source parameter now correctly disabled on matrix and main channels

Atualizações da x32 e m32 da versão 1.05 (2012-08-06)


– channel link fixed when used with remote control

New features:

– daw remote control level meter support

Atualizações da x32 e m32 da versão 1.04 (2012-07-30)


– pre/post send indication on home page fixed (PRE was indicated with the wrong icon)
– send section update issues fixed on home page when using eth remote control
– channel sends not fully updated when changing send type from/to GROUP
– initialize console now sets pans on AUX7/8 to hard left/right
– osc server crashed when path not found – fixed

New features:

– Undo button also available on Scenes/Home screen
– hold UTILITY button to initialize console during boot
– osc server updated to 0.60 (to support pc remote release)

Atualizações da x32 e m32 da versão 1.03 (2012-07-11)


– rotary effect bug fixed
– media full now correctly recognized during file write

New features:

– user section now supports midi events
– user section now supports daw remote control functions
– midi over aes50 for S16 (user section midi and scene midi)
– selected channel and fader clip leds indicate (analog) input clip even with negative trim values

Atualizações da x32 e m32 da versão 1.02 (2012-06-19)


– unit now correctly syncs on AES50 port B @ 44K1 on startup
– correct enumeration of remote controllable preamps (i.e. S16 port B)
– sporadic sync problem (AES50 slave clock phase) on startup fixed
– scan rate of small lcds changed to avoid flickering

New features:

– new lock screen
– console init sets gate threshold to -80dBFS and range to 60dB now

Atualizações da x32 e m32 da versão 1.01 (2012-06-01)


– increased compatibility with slow starting thumb drives

Gostou? Então deixa um comentário, ele é muito importante para que eu possa fazer melhor nos próximos textos. Ahhh!!!! Aproveita e compartilha nos botões das redes sociais no começo desta publicação.

Behringer X32 e Midas X32 do Básico ao Avançado

Você quer aprender mais da Behringer X32 e Midas M32?

cansado de saber pouco e quer ir do básico ao avançado, mas tá com a grana curta pra ficar gastando com deslocamento ou mensalidade?

Seu tempo tá corrido e tem que ser um aprendizado que caiba no seu melhor momento?

Saiba que eu montei um treinamento da Behringer X32 e Midas M32 que tem um método que vai te levar do básico ao avançado, na prática do dia a dia, com uma banda tocando e que se encaixa no seu tempo corrido.

Um treinamento online que você economiza por não precisar se deslocar e só paga uma vez para ter acesso a todas aulas, podendo ver e rever pela internet quando quiser, sem gastar mais nada com isto.

Inclusive, eu te dou uma garantia, se você não gostar no período desta garantia, eu devolvo todo o seu investimento.

Para saber mais, clique aqui:

Comente com sua conta do Facebook:


2 Comentários



Deixe uma resposta

O seu endereço de e-mail não será publicado. Campos obrigatórios são marcados com *

Esse site utiliza o Akismet para reduzir spam. Aprenda como seus dados de comentários são processados.