Todas as Atualizações da X32 e M32 para Download

Todas as Atualizações da X32 e M32 para Download

Tempo de leitura: 31 minutos

Você não vai mais precisar ir em outro lugar, aqui chegou o fim da sua procura, pois aqui, você encontra todas as atualizações da Behringer X32 e Midas M32 para download.

O download está organizado por Sistema Operacional, Driver da Placa de Som (para o Windows que não detecta automaticamente), Editores de Acesso Remoto (Computador e Dispositivo Móvel) e Histórico das atualizações.

Se você tiver dificuldades para instalar as atualizações de sistema operacional, experimente seguir as rotinas na publicação: como atualizar com sucesso (passo a passo).

Olha o que você vai achar neste artigo:

Download do Sistema Operacional para instalar no console X32 e M32

Escolha qual mesa quer atualizar e faça o download:

Behringer X32 (todos os modelos)

x32 Firmware (v4.09):
https://mediadl.musictribe.com/download/software/behringer/X32/X32_Firmware_4.09.zip

Tela de Bloqueio

Exemplo:
https://mediadl.musictribe.com/download/software/behringer/X32/X32_Custom_Screens.zip

Versões anteriores importantes para download (todos modelos)

Firmware (v3.12):
https://mediadl.musictribe.com/download/software/behringer/X32/X32_Firmware_3.12.zip

Firmware (v2.12):
https://mediadl.musictribe.com/download/software/behringer/X32/X32_Firmware_2.12.zip

Firmware (v1.15):
https://mediadl.musictribe.com/download/software/behringer/X32/X32_Firmware_1.15.zip

Download do Driver da Placa de Áudio para Windows

Para mac não é preciso fazer download, ele já identifica a placa plug and play. Já para download para Windows, identifique se sua placa é o mesmo modelo e baixe o driver.

X-LIVE Download Driver para Windows

X-LIVE Driver Setup 4.59
https://mediadl.musictribe.com/download/software/behringer/X-LIVE/BEHRINGER_X-LIVE_DriverSetup_v4.59.0.zip

X-LIVE ASIO Driver 5.12
https://mediadl.musictribe.com/download/software/behringer/X-LIVE/BEHRINGER_X-LIVE_v5.12.0_2021-06-30_setup.zip

X-USB Download Driver para WindowsX-USB ASIO Driver 4.59
https://mediadl.musictribe.com/download/software/behringer/X-USB/BEHRINGER_X-USB_DriverSetup_v4.59.0.zip

X-USB ASIO Driver 5.12
https://mediadl.musictribe.com/download/software/behringer/X32/BEHRINGER_X-USB_v5.12.0_2021-06-30_setup.zip

X-UF Download Driver para WindowsX-UF Firewire Driver 6.13
https://mediadl.musictribe.com/download/software/behringer/X32/Behringer_XUF_1394_Drv_V6_13_0_arch_signed.zip

X-UF USB Driver 6.13
https://mediadl.musictribe.com/download/software/behringer/X32/Behringer_XUF_USB_Drv_V6_13_0_arch_signed.zip

DN32-USB Download Driver para WindowsKT DN32 Driver Setup 4.59
https://mediadl.musictribe.com/download/software/klarkteknik/DN32/KT_DN32-USB_DriverSetup_v4.59.0.zip

KT DN32 LIVE Driver Setup 4.59
https://mediadl.musictribe.com/download/software/klarkteknik/DN32/KT_DN32-LIVE_DriverSetup_v4.59.0.zip

Download do Editor Remoto para Computador

A versão 2.5 é a que mais parece fisicamente com a mesa e vai conseguir conectar com qualquer sistema operacional. Entretanto, já saiba que ao usar o editor na versão 2, não estará usando todas as funcionalidades presentes nas versões acima.

X32-Edit V4 (último das atualizações)

Não é compatível usar o editor da versão 4 com sistema operacionais da mesa em versões anteriores, para isto, será preciso baixar a versão equivalente (3 com a 3, por exemplo).

Atuais

X32-Edit para Windows (v4.3)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-Edit_PC_4.3.zip

X32-Edit para Windows (v4.2)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-Edit_PC_4.2.zip

X32-Edit para Mac (v4.3)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-Edit_MAC_4.3.zip

X32-Edit para Mac (v4.2)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-Edit_MAC_4.2.zip

X32-Edit para Linux (v4.3)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-Edit_LINUX_4.3.tar.gz

X32-Edit para Linux (v4.2)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-Edit_LINUX_4.2.tar.gz

x32-Edit para Raspberry Pi (v4.3)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-Edit_RASPI_4.3.tar.gz

x32-Edit para Raspberry Pi (v4.2)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-Edit_RASPI_4.2.tar.gz

Antigos

X32-Edit para Windows (v3.2)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-Edit_PC_3.2.zip

x32-Edit para Mac (v3.2)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-Edit_MAC_3.2.zip

x32-Edit para Linux 64Bits (v3.2)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-Edit_LINUX_64bit_3.2.tar.gz

x32-Edit para Linux (v3.2)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-Edit_LINUX_3.2.tar.gz

x32-Edit para Raspberry Pi (v3.1)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-Edit_RASPI_3.2.tar.gz

X32-Edit para Windows (v2.5)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-EDIT_PC_V2.5.zip

x32-Edit para Mac (v2.5)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-EDIT_MAC_V2.5.zip

x32-Edit para Raspberry Pi (v2.5)
https://mediadl.musictribe.com/download/software/behringer/X32/X32-Edit_RASPI_2.5.tar.gz

Download do Editor Remoto para Dispositivo Móvel

Mixing Station MX32 (O melhor de todas atualizações)

O Mixing Station não foi feito pela Behringer (Music Tribe), mas na minha opinião tem mais recursos que os softwares oficiais. Recomendo fazer o download dele também.

Para todos modelos de Behringer X32

Android

X32-Q for Android
https://play.google.com/store/apps/details?id=com.behringer.android.control.app.x32q&hl=pt_BR

XM32 Mix for (Mixing Station)
https://play.google.com/store/apps/details?id=org.devcore.mixingstation&hl=pt_BR

iOS

X32 Q for iPhone, iPad, and iPod Touch
https://itunes.apple.com/br/app/x32-q/id587363794?mt=8

X32 Mix for iPad
https://itunes.apple.com/br/app/x32-mix/id542646451?mt=8

MX-Q for iOS
https://apps.apple.com/br/app/mx-q/id1471505954?mt=8

XM32 Mix for iOS (Mixing Station)
https://apps.apple.com/br/app/mixing-station/id1438352631?mt=8

Uma história sucesso em download de firmware para X32 Behringer e Midas M32

Atualizações da X32 e M32 da versão 4.06 (2021-03-09):

Improvements:

– Matrix, M/C, and LR channels can be assigned to DCA and mute groups
– Snippets can now contain the Stereo Bus LR switch parameter
– Parameter Safe for control surface state
– DCA Spill doesn’t move unused faders

Bug Fixes:

– Fixed DCA Spill color and mute group assign issues

Atualizações da X32 e M32 da versão 4.04 (2020-11-27):

New features:

– DCA-Spill
– Press SELECT on DCA to see associated channels (flashing SELECT on DCA)
– Hold SELECT on DCA to change DCA assignment (flashing SELECT on channels)
– Press DCA layer button to toggle between DCA-Spill pages
– Change left fader layer or hold DCA layer button to disable DCA Spill
(Active DCA-Spill is indicated by flashing DCA layer button)

Improvements:

– Improved interoperability with X-Touch
– Gain/Trim issue on CH 1-8
– Issue with send pan indication when using sendPanFollowsLR
– Improved Copy/Pasting of dynamic settings for MTX/ST/M

Bug fixes:

– Prevent freeze when using Snippet-Utility
– Fixed send pan LED-Ring indication when using sendPanFollowsLR
– Hide folder names with non ASCII characters
– Fix for sporadic hang-up of comms with Behringer X-TOUCH controller

Atualizações da X32 e M32 da versão 4.03 (2020-10-06):

New features:

– variable scrolling speed for spectrograph
– Library AES50
– DP48 remote support for stereo link & talkback messages
– improved transmission of DP48 messages through stageboxes and hubs

Improvements:

– Channel
– bring pan back to center when unlinking (if +-100)
– X-Live-Card:
– show warning when SD card is close to maximum capacity (10min / 1min remaining)
– showing protected SD card state
– better backup progress bar
– showing naming prompt when exporting a scene to USB
– better support when importing a CustomBootState as a scene
– CustomBootState can now be auto-loaded without a confirm dialog (append _NoPopUp to the filename)
– hold and scroll on snippets/safes
– added name prompt when exporting to USB

Bug fixes:

– HA gain control not updating digital trim when using User-Banks
– Fixed long Session-Name display
– Fixed show import/export popup text redrawing
– checking User-Blocks param safe and scene safe when loading an old scene

Atualizações da X32 e M32 da versão 4.02 (2020-01-21)

New features:

– Welcome-Screen on first power up after an update (Select the Firmware header on Setup-Global page to display again)
– CustomBootScene.scn can be loaded automatically at bootup and created in the Setup-Global page (also on X32Core/M32C)
– CustomLock.bmp and CustomBoot.bmp support (see examples on www.behringer.com)
– Routing-Input: cycle through the connected AES devices using the Up/Down arrows
– X32Core/M32C: Console backup export and load

Improvements:

– M32/R : faderboard firmwares reviewed for better behaviour on both slow and fast speeds
– showing insert/source details on effects screen
– improved conversion of input clocks to user slots (Routing-User In-Utility-6th button)
– pressing Select and Utility opens the Name/Icon screen
– Xlive locator can be moved using the transport encoders
– showing a dialog when trying to use the USB recorder when no USB drive is inserted
– updating the TopLeft selected channel box when a popup is shown on screen
– added header line to the console.bak file
– X32Core/M32C: Error screen when an export fails

Bug fixes:

– Channel
— preventing copied channel window to redraw when copying remotely
— Config: changed INHP label to IN/LC
— EQ: fixed crossover band type name display and coloured frames redraw
– X-Live-Card:
— redrawing utility header on session selection
— changed the scrub function icon
— disabling transport buttons when Mute Groups are open
— better SD info redraw when popups are shown
– Routing-Input: redrawing connected AES devices when they change
– fixed snippet FX4R selection
– fixed channel source display when Aux1 is set to AES50 33
– fixed recorder text display on the top of the screen
– fixed gain control offset-issue from X-Touch using User-Input
– user assign section shows SD session/markers properly
– reset User-Blocks when loading scene created with former parameter set

Atualizações da X32 e M32 da versão 4.01 (2019-12-06)

New features:

– fast faders option on M32/M32R
– dual FX engines copy A->B and B->A
– added additionnal FW integrity check after update (prevents soft bricking)
– convert Input banks to user slots (in Routing-Input-Utility 6th encoder)
– Show control buttons assignable to User assigns (NEXT, PREV, UNDO, and GO)

Bug fixes:

– Card
— fixed Card In/Out pops and cracks
— Xlive:
— fixed freezing when stopping recording
— correcting setting display on 1st screen
— cant delete empty session anymore
— confusing SD card status display fixed
— Dante: preventing white noise when clock frequencies are mismatched
– Routing
— HA remote availability when forwarding connected HA (for ex, in Stagebox -> MonitorMixer -> FOH configuration)
— corrected source display when AuxIn assigned to Local In
— corrected routing screen names (for user assign-jump to page / osc screen polling)
— input patch overview header changed
– Effects
— fixed LC curve/sends faders redrawing on FX screens
— fixed utility FX rack jumping around when selecting actual FX engine
– Library
— importing files (presets/show/…) made prior to 2.1 works again
— preset number 100 was shown as 10
– Xtouch display corrected (DCA scribstrips update, user slot source display)
– inverted “wedge L/R” icon to match scrible strip
– Snippet-Utility better redraw
– corrected gain reduction scales (chan Gate/Dyn, meters)
– TB destination Bus 10 was showing “Bus1”

Improvements:

– Channel
— confirmation dialog when pasting/loading HA config with +48V activated
— improved Bus-Config send configuration list
– Card
— Xlive session name shown again
— Dante help text now mentions “Enable Sync to external” setting
– Setup
— better Name suggestion / Icon scrolling interaction
— updating Name/Icon screen on remote changes
— factory reset sets TB to external
– Routing
— Output destination and tap are not set at the same time anymore
– Library
— FX library tables reviewed
— added default monitor presets to factory reset
– Monitor
— changed oscillator destination order to previous one
– Keyboard
— keyboard wraps fully (not just line to line)
— new folder name can now have numbers, dash and underscore (no other symbol allowed)
— reduced flickering on symbols page
— reseting Name/Note button on scene save
– OSC protocol
— “-action/setposition 0” is possible

Atualizações da X32 e M32 da versão 4.00 (2019-11-13)

New features:

– point to point user routing, 4 input and 6 output banks (32 in / 48 out)
– DP48/HUB4 remote configuration support
– DP48 setup page with preset library
– send pan optionally follows LR pan function
– full backup export/restore function
– new keyboard with channel name suggestions/history and keyboard layouts
– X32Core/M32C: Export Show function
– M32/M32R: V.1 Fader option (forces update of faderboards, requires reboot)
– option for coloured RTA bars

Improvements:

– new GUI design
– updated channel icons
– coloured fader tracks
– error/warning popups can be closed using encoders
– popup option to perform backup before firmware update
– Channel
— Config: Low Cut filter curve preview
— Config/Sends: Dynamic signal flow display
— EQ: hiding unsettable parameters
— Utility: copied channel overview
– Meters
— channel color indicators
– Routing
— tabs re-organized and grouped by function
— output patch overview tables with shortcut to assign output
— next button also scolls destination list
— iQ setup: improved lists behaviour
– Library
— scrolling using LOAD encoder offers suitable presets only
– Effects
— warning message when creating feedback loop (only when using hardware encoders)
— Utility: FX rack re-organized by effect category
— Utility: copied effect preview
— going from effect to library selects active FX slot
– Setup
— Config: more default bus configurations (all pre/all post)
— Name/Icon: more channel name suggestions
– Monitor
— Talkback: destination preview
— Lamp setting moved to new tab in Monitor screens (when available)
– Scenes
— Cues: cue number 500.9.9 is possible now
— Snippets/Safes: select header to select all elements in column
– Mute Groups
— buttons made more visible on screen

Atualizações da X32 e M32 da versão 3.12 (2019-04-08):

Improvements:

– M32/M32R fader/scribble update after scene recall fixed

Atualizações da X32 e M32 da versão 3.11 (2019-03-22):

Improvements:

– DN32-WSG and DN32-LIVE temporary support over OSC fixed

Atualizações da X32 e M32 da versão 3.10 (2019-02-08):

Improvements:

– xtouch: pressing REC starts 2-channel usb recorder correctly
– xtouch: send to linked bus pan can now be reset by pressing pan encoder
– headamp remote startup bugfix
– X series fader firmware update enabled again

New features:

– channel color/name broadcast via aes50
– support for DN32-WSG

Atualizações da X32 e M32 da versão 3.09 (2018-06-28):

Improvements:

– Fix for auto mute when using very specific PEQ (parametric equalizer) settings

Atualizações da X32 e M32 da versão 3.07 (2017-11-09):

Improvements:

– Midas IO boxes (DL15x, DL25x) now correctly detected when multiple remote clients are connected
– fader accuracy in send on fader mode improved
– performance of automix function improved (with very low input signals)
– ADAT and MADI card sync light flicker fixed
– support for X-WSG and X-LIVE implemented
– fader board firmware update disabled (replaced by standalone updater)

Atualizações da X32 e M32 da versão 3.07 (2016-09-30):

Improvements:

– x-touch channel color and name update problem corrected
– x-touch assigning mute groups fixed
– labels on snippet page corrected (console scope)
– fader tolerance issue with some M series consoles fixed

Atualizações da X32 e M32 da versão 3.04 (2016-08-24)

Improvements:

– PREV cue button function fixed
– gate and dyn module gain graphs always show active gain curve (in grey when module is not active)
– automix gain reduction meter scaling corrected

Atualizações da X32 e M32 da versão 3.00 (2016-08-04)

Improvements:

– indication of available outputs on routing page corrected for models with 8 outs
– fixed issue with send mutes when dca bank was selected in sends on fader mode
– compatibility with new editor version
– rearranged screen encoders on sends page for consistency
– show/snippet name redraw issue fixed
– monitor metering point changed (to indicate output clipping)
– channel name/icon no longer copied (odd->even) when link is activated
– -action/clearsolo now also deactivates key solo

New features:

– 8 channel (1..8) automixing with two groups
– phase invert on outputs, aux, aes/ebu, P16
– xover filter types on main and mono/center
– x-touch remote control (MIDI/Ethernet)

Atualizações da X32 e M32 da versão 2.16 (2016-02-02)

Improvements:

– fixed DIN midi remote control problem introduced in 2.15

Atualizações da X32 e M32 da versão 2.15 (2015-11-06)

Improvements:

– channel group assignments synced when fader link option is reselected
– eq gain center led only lights up when gain is exactly 0 dB
– hard mute state shown on meter pages (dark red fader knob)
– eq band reset bug fixed
– screen draw routines significantly accelerated
ducker attack and release times fixed (were swapped since 2.10)

Atualizações da X32 e M32 da versão 2.14 (2015-07-16)

Improvements:

– X-USB and DN32-USB were reporting wrong sample rate after changing sample rate without reboot

Atualizações da X32 e M32 da versão 2.13 (2015-07-06)

Improvements:

– fixed an issue where iQ speaker settings were not recalled correctly when linked
– iQ setup now also accessible via layer buttons
– fixed an issue where inserts were not activated when usb was very busy during startup
– correct preamp indication on DL152..DL155, output SRC disabled on DL155
– fixed an issue where midi messages were duplicated when assigned to more than one assignable button/encoder simultaneously

Atualizações da X32 e M32 da versão 2.12 (2015-06-01)

Improvements:

– HUI level meters and LCD fixed
– DHCP menu on X32CORE fixed
– fixed rare issue where aes50 slave mode won’t sync
– iQ speaker settings moved to /outputs/p16 path

New features:

– iQ speaker link function

Atualizações da X32 e M32 da versão 2.11 (2015-04-09)

Improvements:

– load show file in X32CORE fixed (snippet offset)
– fader motor issues on M32/M32R (minimum position) fixed
– exclude hidden and system files from usb file list
– correct indication of 0 dB fader position
– scene GO and UNDO leds fixed
– DHCP can be selected on X32CORE
– bus AFL solo correctly uses pan when bus is routed to LR

New features:

– support for M32C, S32, DL32, DL231

Atualizações da X32 e M32 da versão 2.10 (2014-11-20)

Improvements:

– screen flicker when switching between pages with overlay graphics removed
– improved clock stability in Dante slave mode

New features:

– rta detector selection (rms/peak), peak hold, and adjustable decay time
– gate section: expander with adjustable range
– compressor section: compressor/expander with auto mode

Atualizações da X32 e M32 da versão 2.09 (2014-10-23)

Improvements:

– fixed issue where usb drives were not recognized when connected during power-on
– setup/global and setup/config screens rearranged
– sample rate can now be changed without reboot
– issue with mute menu on scenes/home screen fixed
– some redraw issues related to mute menu fixed

New features:

– safe shutdown (incl. usb recorder shutdown), console reboot, firmware update, factory reset added to setup
– selectable 12h (am/pm) and 24h clock mode
– new options: hard mute groups, dcas as mute groups, invert mute leds (for broadcast use)
– DHCP

Atualizações da X32 e M32 da versão 2.08 (2014-09-12)

Improvements:

– Xedit bug fixed when changing fx type
– xlr out routing added to routing snippet
– p16 and aes/ebu routing added to out patch snippet
– jitter when syncing to adat/word clock/madi reduced
– sporadic noise when switching between special combinations of fx types removed
– sporadic click at end of usb playback removed
– sporadic reboot when using too complex osc subscriptions (old X32-mix on iPad 1) fixed
– sporadic loss of meter information (osc clients) fixed; osc server version 2.05

New features:

– support for DN32-MADI, DN32-DANTE, DN32-ADAT
– support for DL15X and DL25X stage box series
– iQ control via stage box P16 port (requires fw >= 2.0 on S16/DL16)

Atualizações da X32 e M32 da versão 2.07 (2014-06-26)

New features:

– support for DL16
– M32 support

Atualizações da X32 e M32 da versão 2.06 (2014-06-16)

Improvements:

– cue delete fixed
– dante card playback gain fixed
– ‘use rta source’ for geq fixed

Atualizações da X32 e M32 da versão 2.05 (2014-05-27)

Improvements:

– fixed incorrect power-on channel mute state when assigned to mute groups
– fixed issues with right fader bank when in geq on faders or remote mode
– fixed dyn key meter on M/C channel
– osc server updates to support fast sync mode w/ X32Edit
– tap function improved

Atualizações da X32 e M32 da versão 2.04 (2014-04-23)

Improvements:

– minor graphics and parameter name fixes

Atualizações da X32 e M32 da versão 2.03 (2014-04-11)

Improvements:

– acceleration for user assignable rotaries on assign home page
– screen flicker and delay fixed when loading cues/scenes/snippets
– scene management improvements and fixes
– remote encoders on assign home page now correctly send out midi messages
– osc server enhancements for X32edit 2.x

New features:

– mix control on compressors (parallel compression option)

Atualizações da X32 e M32 da versão 2.02 (2014-03-11)

Improvements:

– aux/fxrtn sends to subgroup fixed
– output routing tap selector fixed
– dry switch on dimensional chorus
– to end all these discussions: hold sends on fader button (> 1s) to stop blinking
– stereo delay mono feed diagram corrected
– preamp remote control issue with linked channels fixed
– X32CORE scene recall and show import fixed
– snippets fixed (problem with 1st data line)
– usb recorder assign key ‘PREV’ fixed
– GO button led fixed

New features:

– assignable controls can be accessed on X32RACK by pressing MUTEGRP & UTILITY simultaneously
– midi control of mute groups (CC #80..85 on channel 2 [B1 50 xx .. B1 55 xx])
– midi snippet recall ([C1 xx])
– midi cue recall ([C2 xx] 0..127, [C3 xx] 128..255, [C4 xx] 256..383, [C5 xx] 384..499)
– cue and snippet recall on assignable buttons (including name display on small lcds and assign home screen)
– M/C can be used as effect send bus (FX 1..4)
– V1.x scene/show/library conversion

Atualizações da X32 e M32 da versão 2.01 (2014-01-23)

improvements:
– dual enhancer fixed
– file version check (show/libs)

Atualizações da X32 e M32 da versão 2.00 (2014-01-22)

Improvements:

– new eq encoder assignment (main lcd)
– channel icon/name visible on fx inserts (dual mono only)
– console init bus send 1-8 default now post eq instead of pre fader
– faders disabled when locked and remote controlled
– comp threshold range reduced to -60..0 dBFS
– sends on fader button flashing
– relaxed sends on fader function (automatically deactivated only by pressing DCA button)
– improved indication of sends on fader signal flow on small displays
– stagebox lock moved to setup/preamp page
– increased parameter resolution on rackamp
– increased sensitivity on deesser
– gain reduction meter on precision limiter

New features:

– eq on fx return channels
– expander mode (1:2, 1:3, 1:4) in gate section
– 100 band rta/spectrograph (on meter page and as overlay on eq and geq screens)
– user assign rotaries available on assign home page (for producer/compact)
– console lock on HOME button (2.5s), doubles as safe shutdown
– individual eq band reset (w/ undo)
– dca level meters (max post fader level of assigned channels)
– additional pre gate tap for bus sends
– additional post gate tap for outputs
– output routing w/ optional muting (e.g. mute P16 feeds w/ channel mutes)
– smart handling of send levels when changing bus mode
– gate / comp key signal level indication
– additional lcd color modes (inverted display)
– xlr outputs added to routing matrix (e.g. foh passthru)
– sends on fader for mono/center bus and matrices (bidirectional)
– fader extend mode (input channels on bus faders); press two bank select buttons simultaneously (Producer and Compact only)
– gain split mode for foh/mon; ha gains can only be set on setup/preamp page, channels have trim only
– gain remote option; allows console gains to be remote controlled by another console (e.g. use X32RACK as stagebox)
– when pushing the effects button or selecting a channel while on any fx page, the corresponding fx and layer is
automatically selected when used as insert on selected channel or as send effect on selected bus
– jump to page user function optionally includes fx layer
– midi control of channel level, mute, and pan
– freeze function on vintage room
– lots of new effects
– new scene management (cues/scenes/snippets)
– faster boot time and smaller update file size

Atualizações da X32 e M32 da versão 1.15 (2013-07-26)

Improvements:

– support for latest X32-Edit
– ‘select follows solo’ function only selects a channel when solo is activated, not when deactivated
– icon and name now copied when activating a channel link

New features:

– additional aux routing sources (2, 4, or 6 channels)
– direct routing of aux inputs to aes ports and/or card
– push & hold the encoder during power-on to initialize the X32CORE
– X32CORE enters ‘safe to power off’ mode (i.e. all settings saved) when in setup menu (push & hold the USB button)

Atualizações da X32 e M32 da versão 1.14 (2013-06-12)

Improvements:

– better indication of selected channel on main lcd when no channel icon is set (for Producer and Rack)
– eq section locut/hicut leds also used for xover filter types
– headamp settings are copied when channels get linked (and link ha preference switch is on)
– stage box gains can be (pre-) set when no stage box is connected (setup/preamps page)
– digital trim now +/- 18 dB

New features:

– channel auto select option
– fader of selected channel can be assigned to user encoders
– tape (usb recorder) control can be assigned to user buttons
– X-USB card support

Atualizações da X32 e M32 da versão 1.13 (2013-02-06)

Improvements:

– wrong indication of channel send fader position on home screen after changing send tap/bus type fixed
– mackie control implementation fixed
– OSC server enhancements

New features:

– dca mutes and mutegroups available on assignable buttons
– fader (channel and dca) available on assignable encoders

Atualizações da X32 e M32 da versão 1.12 (2013-01-17)

Improvements:

– encoder acceleration improved
– channel afl solo now always post insert
– sends on fader related freeze fixed

New features:

– full support for all new models

Atualizações da X32 e M32 da versão 1.11 (2012-12-11)

Improvements:

– link/unlink solo issue fixed

Atualizações da X32 e M32 da versão 1.10 (2012-11-29)

Improvements:

– talkback gain reduced (default was way too high)
– surface engine redesigned to support all new models
– handling of fader move events while switching fader assignment fixed
– bus afl solo now always post insert
– sporadic noise when changing insert position removed
– user buttons can now be (re-)assigned to JUMP function regardless of previous function (by holding one
of the SET buttons)
– user defined buttons now correctly return to previous banks when used for sends on faders

New features:

– direct control of all preamps (on setup page) to allow inline recording mode and live card inserts
(route local or aes inputs to card, route card returns to console input channels – set preamp
gain (2.5 dB steps) on this new setup page, adjust digital trim on console ‘tape return’ channels)
– Dual and Stereo DeEsser Effect with M/S processing option
– phase invert on matrix buses
– xover filter types (butterworth, bessel, linkwitz-riley up to 24dB/oct) on matrix bus eq bands 1/6
(selectable on EQ page). These use bands 1+2 and/or bands 5+6 when activated.
– matrix send taps selectable (pre/pos EQ, pre/post fader)
– independent channel mute and fader safes
– channel/bus mute indication on meter screens
– scribble strip editing removed from CONFIG/UTILTY page – now accessible on SETUP/SCRIBBLE STRIP page
(or use select button + UTILITY shortcut)
notes:
– due to additional scenes parameters (matrix bus options) all scenes that use matrix buses should be checked
(existing scenes do not contain the additional parameters). It is best to initialize the console, then load and
immediately safe back each scene.

Atualizações da X32 e M32 da versão 1.09 (2012-09-27)

Improvements:

– when ‘safe main level’ and ‘m/c depends on main l/r’ are activated,
m/c level is no longer set to -oo on powerup
– user defined buttons now correctly return to previous page when used as channel select
– ‘pre’ leds now correctly work when auxes or fx returns are selected
– player now plays non-canonical wave files with no artifacts at the end
– recoder automatically restarts with new file when size limit (2GB) is exceeded
– dca solo now also includes channels that are not routed to main L/R (e.g. to group buses)
– erratic behaviour of ch 1 input delay and matrix 6 insert fixed

New features:

– current settings (i.e. single scene) can now directly be saved (to the usb drive)
– fx utilities include algorithm (fx type) selection
– osc server updated to 0.7 (to support XiControl update)
– signal flow diagrams dynamically updated when changing dyn/insert position

Atualizações da X32 e M32 da versão 1.08 (2012-08-31)

Improvements:

– ambience fx redraw issue fixed
– player/recorder no longer drops last block
– crash when using channel library after assigning ‘- Param 64 -‘ to any assignable controller fixed
– pre/post indication on channel home screen updated

New features:

– sends on fader on a specific channel or bus can be assigned to user assignable buttons
– scenes can be assigned to user assignable buttons
– holding down a select button and pressing UTILITY now directly accesses the naming screen
– solo option ‘Dim PFL’ allows to apply DIM to PFL sources (to align levels when using as monitor console)

Atualizações da X32 e M32 da versão 1.07 (2012-08-22)

Improvements:

– sporadic freeze when using presets/scenes with long names (> 15 characters) fixed

Atualizações da X32 e M32 da versão 1.06 (2012-08-21)

Improvements:

– freeze when using library fx load with confirmation disabled fixed
– thump noise when using master GEQ and loading tremolo/pan into any other fx slot removed
– main bus afl solo fixed
– non-ascii characters in filenames (on usb thumb drive) are now ignored so that these files
can be selected for play (though it is recommended to use ascii characters only)
– after song has been played (in single mode), player returns to stop mode
– high eq in tube stage fx fixed
dyn key source parameter now correctly disabled on matrix and main channels

Atualizações da X32 e M32 da versão 1.05 (2012-08-06)

Improvements:

– channel link fixed when used with remote control

New features:

– daw remote control level meter support

Atualizações da X32 e M32 da versão 1.04 (2012-07-30)

Improvements:

pre/post send indication on home page fixed (PRE was indicated with the wrong icon)
– send section update issues fixed on home page when using eth remote control
– channel sends not fully updated when changing send type from/to GROUP
– initialize console now sets pans on AUX7/8 to hard left/right
– osc server crashed when path not found – fixed

New features:

– Undo button also available on Scenes/Home screen
– hold UTILITY button to initialize console during boot
– osc server updated to 0.60 (to support pc remote release)

Atualizações da X32 e M32 da versão 1.03 (2012-07-11)

Improvements:

– rotary effect bug fixed
– media full now correctly recognized during file write

New features:

– user section now supports midi events
– user section now supports daw remote control functions
– midi over aes50 for S16 (user section midi and scene midi)
– selected channel and fader clip leds indicate (analog) input clip even with negative trim values

Atualizações da X32 e M32 da versão 1.02 (2012-06-19)

Improvements:

– unit now correctly syncs on AES50 port B @ 44K1 on startup
– correct enumeration of remote controllable preamps (i.e. S16 port B)
– sporadic sync problem (AES50 slave clock phase) on startup fixed
– scan rate of small lcds changed to avoid flickering

New features:

– new lock screen
– console init sets gate threshold to -80dBFS and range to 60dB now

Atualizações da X32 e M32 da versão 1.01 (2012-06-01)

Improvements:

– increased compatibility with slow starting thumb drives

Não coloquei nesta publicação o manual da x32 em português com um conteúdo pra cada modelo, depois passa lá na publicação pra fazer download.

Gostou? Então, deixa um comentário, ele é muito importante para que eu possa fazer melhor nos próximos textos. Ahhh!!!! Aproveita e compartilha nos botões das redes sociais no começo desta publicação.

Comente com sua conta do Facebook:

Comentários:

Deixe um comentário

O seu endereço de e-mail não será publicado. Campos obrigatórios são marcados com *